Customer guide · Alarms
Intruder alarm systems.
Detection, verification, monitoring and app control, and how to choose an alarm people can trust.
Overview
Intruder alarm systems
A good alarm system tells you what is happening, where, and gives you enough to act. This guide covers how alarms work, the choices between wired and wireless, and how to avoid the false alarms that make people stop trusting them.
Motion detectors, door contacts and glass-break sensors report to the panel the moment something changes.
Separate areas and schedules so each part of the site arms and disarms the way it actually runs.
Photo or video verification lets an alarm be checked before anyone is sent.
Panic and duress buttons for staff safety, showing which button and room raised the alarm.
Arm, disarm and receive alerts on your phone, with user access you control.
Optional monitoring by a monitoring centre, under a separate agreement.
When an alarm happens
Detect
A detector picks up movement, an opened door or broken glass and reports to the panel.
Verify
Photos, video or the pattern of detectors triggered help confirm a real event.
Respond
Sirens sound, the right people are notified and the monitoring centre follows your response plan.
Step 1
Wired, wireless or a mix
Both are reliable when designed properly. The choice comes down to the building, the site and how it will grow.
| Wireless (e.g. Ajax) | Wired (e.g. Inner Range, ICT) | |
|---|---|---|
| Install | No cable to each detector. Faster, tidier and less disruptive in finished buildings. | Cable to every device. Best fitted during construction or a refit. |
| Verification | MotionCam detectors send a photo series with each alarm. | Verification through integrated cameras and detector patterns. |
| Scale | Up to 200 devices on a Hub 2 Plus, across 25 areas, with range extenders for large sites. | Large and multi-site estates, with expansion modules and enterprise software. |
| Access control | Alarm-focused, with scenarios to control lights, locks and gates. | Alarm and access control in one controller. |
| Power | Device batteries, typically years, with low-battery warnings well ahead. | Powered from the panel, with a backup battery in the panel. |
Step 2
Design questions for your site
Answer these and the detectors, areas and response plan follow.
- 01
What are you protecting, and from what?
Stock, equipment, cash, people or the building itself. The risk decides how much detection and verification is worth it.
- 02
How is the site used, and when?
Opening hours, cleaners, early starts and weekend access. Areas and schedules should match real life.
- 03
Who responds to an alarm?
Keyholders, a monitoring centre, a patrol, or all three. Write down who is called, in what order, and what they do.
- 04
Are there people on site alone?
Duress buttons and personal alarms protect staff working alone or after hours.
- 05
What causes false alarms today?
Pets, heaters, open windows, balloons or people forgetting codes. Fixing these is often the biggest win.
A response plan in one line
“Alarm in the warehouse after 6 pm: monitoring centre checks the photo, calls the manager, then the second keyholder, then a patrol.”
Agree this before the system goes live, and review it whenever keyholders change.
Step 3
What goes into a system
These are the platforms and devices we commonly install. Your quote lists the exact equipment for your site.
Ajax Hub 2 Plus
Ethernet, Wi-Fi and dual 4G reporting, switching paths automatically.
ajax.systems ↗Inner Range Inception
Alarm and access control in one controller with a web interface.
innerrange.com ↗Inner Range Integriti
Large and multi-site security with central monitoring and reporting.
innerrange.com ↗Panic buttons
Fixed or wearable buttons. The alarm shows which button was pressed and the room it is assigned to.
ajax.systems ↗Step 4
Fewer false alarms, faster response
False alarms waste money and teach people to ignore the system. Most are preventable.
ProblemAlarms from pets or heaters
What fixes itPet-immune detectors, correct placement and sensitivity set for the room.
ProblemStaff set it off opening up
What fixes itEntry delays that suit the walk to the keypad, and arming by app or fob.
ProblemNobody knows if it is real
What fixes itPhoto verification, so the alarm is checked before anyone is sent.
ProblemKeyholder list is out of date
What fixes itReview the response plan whenever staff change, and at every service visit.
Ask your installer
- Wired or wireless, and why for this building?
- How will alarms be verified before a response?
- How does the panel report: internet, 4G or both?
- Who monitors it, and what is the response plan?
- How often should it be tested and serviced?
At handover you should receive
- A zone list with every detector and its area
- User codes, fobs and app access set up and tested
- A tested response plan and keyholder list
- Training on arming, disarming and alerts
- Battery and service schedule, or a maintenance plan
Read more on the official sites
Figures are manufacturer specifications and vary with model, site and configuration. Monitoring is provided by a third-party monitoring centre under a separate agreement. This guide is general information; your quote sets out the agreed scope. Brand names are trademarks of their owners.
Plan it before we talk.
System health check
Ten questions to see whether your existing system needs attention.
Open the tool →Annual alarm maintenance
What happens at a maintenance visit and why it matters for insurance and reliability.
Find out more →Access control explained
Keyless, wire-free and online access, credentials, audit trails and how to choose.
Read the guide →Take it with you
Keep the full guide for your site walk.
The PDF includes worksheets to fill in before we visit.