Skip to content

Customer guide · Video

Choosing the right Axis camera.

How to decide what each camera needs to see, which type of camera does it best, and what sits behind it.

Download the PDF ↓ PDF · 11 pages · free Our service →

← All guides and tools

Step 1

Start with the job, not the camera

A good system starts with a list of places and, for each one, what the footage must prove. Five questions answer almost everything.

  1. 01

    What do you need to see?

    Is it enough to know someone is there, or do you need to recognise a face or read a number plate? This decides how much detail each camera needs.

  2. 02

    How far away is it?

    Detail drops with distance. A camera that identifies a face at 3 m may only show a figure at 30 m.

  3. 03

    What is the light like?

    Bright sun through a doorway, a dark car park, headlights, no light at all. Each needs a different camera feature.

  4. 04

    Where will it be mounted?

    Indoors or outdoors, ceiling or wall, within reach of people, exposed to weather, dust, salt or vandalism.

  5. 05

    What happens with the footage?

    Watched live, reviewed after an incident, or used to raise alerts? How long must it be kept?

A simple way to write it down

“Main entrance, identify anyone coming in, 4 m from the door, strong backlight in the afternoon, outdoors under an awning, kept 30 days.”

For every camera position, one line like this is enough to choose the camera, the lens and the settings.

Step 2

How much detail do you need?

Cameras are specified by how many pixels fall on each metre of the scene. Four levels are used across the industry (DORI, from IEC 62676-4).

LevelPixels per metreWhat it lets you do
Detect25 px/mSomething or someone is there. Good for alarms and perimeters.
Observe62 px/mWhat a person is doing, clothing colour, general appearance.
Recognise125 px/mSomeone you know can say with confidence that it is that person.
Identify250 px/mA stranger can be identified beyond reasonable doubt. Needed at entry points and counters.

Step 3

Camera types side by side

TypeWhat it isGood forWatch for
DomeIndoor and outdoor ceiling or wall mounting. Discreet, tamper-resistant, hard to tell where it is pointing.Shops, offices, corridors, receptions, schools.Limited zoom on the smallest models.
BulletOutdoor wall or pole mounting with built-in infrared. Clearly visible, which deters.Car parks, building perimeters, entrances, yards.More visible to vandals; mount out of reach.
BoxInterchangeable or long lenses and the best image quality for a fixed view.Long views, number plates, high-detail areas.Larger; usually needs a housing outdoors.
Panoramic / 360°One camera sees a whole room or both directions of a hallway.Open-plan offices, retail floors, lobbies, intersections.Less detail at the edges; not for identification at distance.
Multi-directionalThree or four camera heads in one housing, each aimed separately. One cable, one mounting point.Building corners, car park intersections, warehouses.Higher price than a single camera.
PTZPans, tilts and zooms to follow activity. Operators can zoom in on detail far away.Large sites, yards, ports, live monitoring.Only sees one place at a time; best with fixed cameras alongside.
ThermalSees heat, not light. Detects people and vehicles in total darkness, smoke and glare.Fence lines, perimeters, remote sites, early warning.Doesn't identify people; pair it with a visual camera.
ModularA tiny sensor on a cable with a separate main unit. Hides almost anywhere.ATMs, counters, lifts, vehicles, covert spots.More parts to install.
Explosion-protectedCertified stainless housings for areas with flammable gas or dust.Fuel, gas, chemical and grain sites.Specialist pricing and installation.
CubeSmall, affordable indoor camera with infrared, often on a desk or shelf.Small offices, shops, home offices.Indoor only; fixed wide view.

Step 4

Light and weather

Most footage that fails is footage taken in difficult light. Match the camera to the worst conditions the spot will see.

ConditionWhereWhat to use
Dark, but some lightCar parks with street lights, warehouses at nightLightfinder keeps colour and detail in very low light, so clothing and vehicle colours are still visible.
No light at allUnlit yards, fence lines, back lanesBuilt-in infrared (models ending in L, e.g. LE, LVE). Check the IR range in the datasheet against the distance needed. Images are black and white.
Bright and dark in one viewDoorways, glass entrances, loading docksForensic WDR balances sunlight and shade so faces in a doorway aren't silhouettes. Essential for entrances.
Long distance in darkness, smoke or fogPerimeters, remote assetsThermal cameras detect heat out to hundreds of metres regardless of light.
HeadlightsDriveways, gates, number platesPurpose-built plate cameras (AXIS Q1800-LE) tuned for plates at speed, day and night, with built-in OptimizedIR.
The letters in the Axis model name. E means outdoor rated, L means built-in infrared and V means vandal-resistant. An LVE camera has all three.

Quick pick

Which camera, at a glance

Follow the row that matches the spot. Each ends at a camera type and the Axis line we usually start with.

What it needs to doWhereLightStart with
Identify people
at a door, counter or gate
IndoorsNormal lightFixed or varifocal dome
M-series / P32 series
Identify people
at a door, counter or gate
OutdoorsBacklight or nightOutdoor varifocal dome
P3275-LVE / P3277-LVE
Read number plates
driveways, gates
Gate or roadDay and nightPlate camera
Q1800-LE
Watch an area
yard, car park, floor
Open roomNormal light360° panoramic dome
M43 series
Watch an area
yard, car park, floor
Outdoors, largeDarkIR bullet or multi-directional
P14 series / P37 series
Detect intruders
fences, remote land
Long perimeterAny light, no lightThermal + analytics
Q19 series
Follow activity live
large sites, operators
Large open siteDay and nightPTZ
Q60 / Q63 series
Hide the camera
lifts, ATMs, counters
Tight spaceNormal lightModular
F / FA series

Try it online

Our camera selector does this for you in five questions.

Open it at securatech.com.au/resources/camera-selector, save each position and send the list to us.

Guides and tools

Plan it before we talk.

All guides and tools ↗
TOOL

Camera selector

Five questions about a camera position give the camera type and Axis line to start with.

Open the tool →
GUIDE

Video management with Nx Witness

Recording, search, remote viewing and system health for multi-camera sites.

Read the guide →
GUIDE

Networks and wireless links

Switches, PoE budgets, point-to-point links and backup internet for security systems.

Read the guide →

Take it with you

Keep the full guide for your site walk.

The PDF includes worksheets to fill in before we visit.