Customer guide · Infrastructure
Networks and wireless links.
Switches, PoE budgets, point-to-point links, backup internet and keeping security systems online.
Overview
Networks and wireless links
Cameras, door controllers, alarm panels and PA all run on the network now. This guide covers how to design a network that keeps security systems online, how to link buildings without trenching, and how to stay connected when the internet drops.
Managed PoE switches that power and connect cameras, readers, phones and access points.
Security devices on their own network segment, apart from office computers.
Access points placed for coverage and capacity, not just signal bars.
Point-to-point wireless to connect buildings, sheds and gates without trenching.
A second internet path, such as Starlink or 4G, for when the main service drops.
Battery backup so the network and cameras ride through power blips.
Resilience in three layers
Inside
Switches, cabling and UPS keep devices powered and connected on site.
Between
Fibre or wireless links join buildings into one network.
Outside
A primary internet service with a backup path that takes over automatically.
Step 1
Design choices that matter
Most security network problems come from a few early decisions.
| Choice | Why it matters | Usual recommendation |
|---|---|---|
| Separate security network | Cameras and controllers are kept apart from office traffic and risks. | A separate network or VLAN for security devices. |
| PoE budget | Each switch can only supply so much power in total. | Add up every device and leave headroom for growth. |
| UPS runtime | Decides how long cameras and the network last in a power cut. | Agree a runtime, then size the UPS to the load. |
| Remote access | Opening recorders to the internet is a common weakness. | Use vendor cloud access or VPN, never open ports. |
| Internet backup | Alerts, remote viewing and cloud systems stop when the internet does. | A second path with automatic failover where it matters. |
Linking buildings
| Option | Good for | Watch for |
|---|---|---|
| Fibre | Permanent, high-capacity links between buildings. | Trenching or aerial cabling cost and disruption. |
| Point-to-point wireless | Sheds, gates, yards and buildings across a road or paddock. | Needs a clear line of sight between the two radios. |
| Mesh or outdoor Wi-Fi | Covering yards and open areas for devices that move. | Lower capacity than a dedicated link. |
Step 2
Questions for your site
These answers shape the switches, links and backup.
- 01
What runs on the network?
List cameras, controllers, alarm panels, phones, Wi-Fi and computers, and which ones must never go offline.
- 02
Where are the buildings and outlying areas?
A site plan with sheds, gates and yards shows where links are needed and whether there is line of sight.
- 03
What happens when the internet drops?
If alarms, cameras or cloud access depend on it, a backup path is worth considering.
- 04
How long must it run in a power cut?
Minutes to ride through a blip, or hours to keep cameras recording.
- 05
Who manages it?
Your IT provider, us, or both. Agree who owns what before devices go on the network.
Example: fibre drops out at the street
“The router fails over to the Starlink backup in seconds. Wi-Fi, cameras and the annex link stay online throughout.”
This is the scenario shown on our home page. A backup path is configured and tested as part of the installation.
Step 3
What goes into a network
Typical building blocks. Your quote lists the exact hardware for your site.
Managed PoE switches
Power and connect devices, with network separation for security systems.
securatech.com.au ↗Routers and firewalls
Internet connection, failover and secure remote access.
securatech.com.au ↗Wi-Fi access points
Coverage designed for the building and the number of users.
securatech.com.au ↗Point-to-point radios
Join buildings and outlying areas where cable is impractical.
securatech.com.au ↗Step 4
Common problems and fixes
What we find most often on sites where security systems share a network.
ProblemCameras drop out when the office is busy
What fixes itA separate network for security devices, with switches sized for the load.
ProblemThe shed across the yard has no connection
What fixes itA point-to-point wireless link instead of trenching.
ProblemEverything stops when the internet goes down
What fixes itA backup path such as Starlink or 4G with automatic failover.
ProblemCameras go blank in a power blip
What fixes itA UPS sized for the PoE load and tested on handover.
Ask your installer
- Will security devices be on their own network?
- What is the PoE budget, and how much is spare?
- How long will the UPS keep things running?
- How is remote access secured?
- What happens when the internet drops?
At handover you should receive
- A network diagram and device list
- Switch, router and Wi-Fi settings recorded securely
- Failover and UPS tested in front of you
- Remote access set up for the right people
- Firmware and support arrangements agreed
Read more on the official sites
Wireless link performance depends on distance, line of sight, interference and equipment. Starlink availability and service are provided by Starlink under its own terms. This guide is general information; your quote sets out the agreed scope. Brand names are trademarks of their owners.
Plan it before we talk.
Take it with you
Keep the full guide for your site walk.
The PDF includes worksheets to fill in before we visit.