Customer guide · Infrastructure
Structured cabling and documentation.
Cable types, PoE, planning, testing and keeping a usable record of what is installed.
Overview
Structured cabling and documentation
Every camera, access point, phone and computer depends on the cabling behind it. Done well, it is tidy, tested and easy to follow years later. This guide explains the choices and what good documentation looks like.
Every run is tested on completion, with the results included in the handover.
Cables, patch panels and outlets labelled at both ends to one consistent scheme.
Racks, patching, outlets and power recorded in one live record.
Category-rated copper chosen for the speed, distance and PoE power your devices need.
Fibre backbones and lead-ins between cabinets, buildings and your carrier.
The standard maximum length of a copper channel, from switch port to device.
How it is delivered
Plan
Racks, outlets and patching are planned before a cable is run, so the layout is agreed up front.
Install
Cable is installed, terminated, labelled and tested, following the plan on site.
Hand over
You receive test results, rack layouts and an outlet schedule the day we leave.
Step 1
Choosing the cable
The right cable depends on the speed you need, the distance and whether it powers the device.
| Type | Speed and distance | Typical use |
|---|---|---|
| Cat 6 | 1 Gb/s to 100 m; 10 Gb/s only up to about 55 m, depending on the installation. | Computers, phones, cameras, access points and most PoE devices. |
| Cat 6A | 10 Gb/s to 100 m, with better performance for high-power PoE in bundles. | Wi-Fi access points, high-power PoE and anything built to last a decade or more. |
| Fibre (multimode) | High speeds over hundreds of metres. | Backbones between cabinets in one building or campus. |
| Fibre (singlemode) | High speeds over kilometres. | Links between buildings, long site runs and carrier lead-ins. |
Power over Ethernet (PoE)
| Standard | Power at the switch port | Powers |
|---|---|---|
| 802.3af (PoE) | Up to 15.4 W | Most fixed cameras, phones, card readers. |
| 802.3at (PoE+) | Up to 30 W | Wi-Fi access points, cameras with heaters, some PTZs. |
| 802.3bt (PoE++) | Up to 60 W or 90 W | Large PTZ cameras, displays and high-power devices. |
Step 2
Plan before the first cable
Five questions that save rework and make the installation easy to support.
- 01
Where does everything need a connection?
Mark desks, ceilings, walls and outdoor positions on a floor plan, including cameras, access points and readers, plus a few spares.
- 02
Where will the cabinet go?
Somewhere secure, ventilated and with power, within 90 m of every outlet it serves. Large sites need more than one.
- 03
What will it power?
List the PoE devices so switches, cabling category and UPS are sized together.
- 04
How will it be labelled?
One scheme for every cable, panel and outlet, agreed before work starts and used by everyone.
- 05
Who keeps the records?
Documentation only helps if it stays current. Decide who updates it after moves and changes.
Documented in CABVIX
Trace any outlet back to its patch panel and switch port, and scan a cabinet’s QR label to open its record.
CABVIX is the network documentation software we built from years of installs. Every Securatech data installation can be handed over with a live CABVIX record.
Step 3
What goes into a data installation
These are the elements we commonly install. Your quote lists the exact cabling, outlets and hardware.
Cat 6 / Cat 6A
Category-rated cabling for computers, phones, cameras and access points.
securatech.com.au ↗Racks and cabinets
Floor and wall cabinets sized for today with room to grow.
securatech.com.au ↗Wall and floor outlets
Data points where people and devices need them, labelled to the panel.
securatech.com.au ↗Switching and UPS
PoE switches and UPS battery backup for connected devices.
securatech.com.au ↗Step 4
Signs of a good installation
Problems we often find on inherited sites, and how a structured installation avoids them.
ProblemNobody knows which cable goes where
What fixes itLabels at both ends and an outlet schedule that matches them.
ProblemA link drops out intermittently
What fixes itEvery run tested on completion, with results kept for comparison.
ProblemThe cabinet is a tangle of leads
What fixes itPatch panels, cable management and leads cut to length.
ProblemCameras stop when the power blips
What fixes itUPS sized for the PoE load, with runtime agreed in advance.
Ask your installer
- Which cable category, and why for this site?
- Is the installer a registered cabler?
- Will every run be tested, and will I get the results?
- What labelling scheme will be used?
- What documentation will I receive, and in what form?
At handover you should receive
- Test results for every cable
- Rack layouts and patching records
- An outlet schedule matched to the labels
- Access to the CABVIX record of your site
- Spare capacity noted for future changes
Read more on the official sites
Speeds, distances and PoE figures are general industry values; actual performance depends on the cable, components, installation and environment. This guide is general information; your quote sets out the agreed scope.
Plan it before we talk.
Take it with you
Keep the full guide for your site walk.
The PDF includes worksheets to fill in before we visit.